折纸版X-WING教程

喵巫妖 · 发表于 2008-5-27 19:37:50

比较强大……
推荐星战爱好者来做……非常像呢

鸟文的
Here are step-by-step instructions for how to make an origami x-wing, as seen at Picocon 22, and as described by Alex Crosse. He is a proper Origami club person; the terribly un-technical descriptions are entirely my fault.

This was done using a 15cm-square of thin paper, coloured on one side and white on the other - the x-wing ends up coloured all over.

When making folds, try to be as precise as possible, particularly when folding a corner in half! Some of the folds get very thin at the end.

喵巫妖 · 发表于 2008-5-27 19:39:43

Start with the coloured side (here blue) face up

Fold along one diagonal, open it up, then fold along the other. In this picture, the folds are such that that paper forms a cup (rather than a hill).

Turn the paper over, and fold horizontally, open up again, then vertically. These folds end up in the opposite direction to the previous ones.

Squash the paper together, inwards along the folds, so that this square shape is formed.

Fold one of the closed flaps towards the centre

喵巫妖 · 发表于 2008-5-27 19:42:40

Then unfold the flap, and fold it back on itself, the other way.

Unfold the flap again, and open up the inside and squash it flat.

Fold one white side down to the centre

Unfold it.

Tuck it under the bit that it just folded over.

Push it under further, so that the diagonal it lies under goes right to the centre.

Repeat on the left.

Repeat with all the other 3 folds.

喵巫妖 · 发表于 2008-5-27 19:47:44

Fold the small central point downwards. Also do this on the opposite side - but leave the remaining 2 central points as they are.

Rotate by 90deg so that the 'legs' are nearest you

Fold over one side flap, like turning the page of a book

Fold the 'leg' near you upwards, folding horizontally in the middle

Fold the 'leg' back down

Pinch the leg inward towards the centre, as shown

Continue pinching so that the leg ends up folded inside and sticking out at 90 degrees.

Finished folding it flat

Repeat for the other 3 legs.

Probably the most fiddly stage: Fold the long side in half, into the centre. This will start to drag the top line of the leg with it, don't worry.

Finish folding flat

Fold the leg flat too - this folds it in half

Repeat on the other side

And again for all the others. Then get it so that the engines at the bottom are split vertically down the middle, as shown.

Fold one engine back into itself, between the wings

喵巫妖 · 发表于 2008-5-27 19:50:54

Fold the 2nd engine too

Open up the fold along the top part of the wings

Reverse-fold the wingtip back and inside, as shown in these 3 pictures

Repeat with the other 3 wings

Finished!

如果是用白纸的话在加上装涂估计会非常漂亮的

飘零剑李二狗 · 发表于 2008-5-27 19:52:31

对于此类活动向来止步于欣赏~~~

张马大 · 发表于 2008-5-27 19:52:48

有意思~ [s:7]

喵巫妖 · 发表于 2008-5-27 19:54:12

强人很多呢
估计像憬之这样的动手强人就可以做出来
记的以前有见过用纸折的星际系列
不知道能找到那个的教程不

张憬之 · 发表于 2008-5-27 20:19:40

抬爱了..我是没戏了.对折纸有阴影...

胡传魁 · 发表于 2008-5-27 21:23:54

[s:7] [s:7] [s:7] [s:7]

帝国才是王道，西斯万岁！！！！

反抗军去死！！！！！！！！！！

绝地就是给自己挖墓掘地！！！！

睡魔入侵 · 发表于 2008-5-27 21:49:28

如此强大的折纸，自然要配上强大的配乐～～

如果无法播放，请点击此处在新窗口打开

喵巫妖 · 发表于 2008-5-28 08:56:51

引用第9楼hu4514325于2008-05-27 21:23发表的 :
[s:7] [s:7] [s:7] [s:7]

帝国才是王道，西斯万岁！！！！

反抗军去死！！！！！！！！！！
.......

哈哈
我好象有点影响确实在哪见过有达人用纸折的帝国带式

lbhztz · 发表于 2008-5-28 11:22:21

有纸模型

NukeCoke · 发表于 2008-5-28 20:03:25

上面要顶上R型机器人才像!!

bourne · 发表于 2008-5-28 20:09:53

借用星战论坛某版的签名：
消灭西斯，自由属于人民！

Death to Sith, Freedom to People!

张马大 · 发表于 2008-5-28 20:10:35

小时候买过一本《折纸大全》，经常折个钢琴、畚箕什么的... 当然，没有这个那么精巧... [s:4]

NukeCoke · 发表于 2008-5-28 20:11:45

多么狭隘的人心哪!
看那宇宙是多么宽广啊!
我既爱绝地也爱西斯~是他们构成了整个传奇

在大阴谋,大谋杀,大灾难中体验宇宙的浪漫罢~

pkleemon · 发表于 2008-5-28 20:16:59

-O- 前面的叠法貌似和纸鹤一样啊。。。

		自动登录	找回密码
密码			开放注册